Product ID:ALUMINUM SILICONE-ALKYD, X-5767
MSDS Date:05/01/1995
FSC:8010
NIIN:00-664-7468
MSDS Number: CCXPP

SENTRY PAINT CO

237 MILL ST
DARBY, PA 19023
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 215-522-1900

Preparer: ALBERT FALCO

Cage: IO235

SENTRY PAINT CO

DARBY, PA 19023 US

Telephone: 215-522-1900

Cage: IO235

2 @ 20C

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 56.8%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

45 @ 25C

CAS: 64742-89-8

Fraction By Weight: 14.5%

OSHA PEL 300 PPM (MFR)

ACGIH TLV: 300 PPM (MFR)

REACTS W/WATER, ACIDS/ALKALIS TO FORM

RTECS: 9999999ZZ

MATLS. NATIONAL PROTECTION ASSOCIATION, BATTERYMARCH

RTECS: 9999999ZZ

DUE TO VOMITING CAN CAUSE CHEMICAL

RTECS: 9999999ZZ

INERT MATL SUCH AS SAND/EARTH. TRANSFER

RTECS: 9999999ZZ

OR REMOVE W/INERT ABSORBENT. USE ONLY NON-SPARKING

RTECS: 9999999ZZ

GROUNDWATER WITH SPILLED MATERIAL OR USED ABSORBENT.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:IRRITATION, REDNESS,
TEARING, BLURRED VISION. SKIN:DRYNESS, IRRITATION, DERMATITIS.
INHALATION:NASAL AND RESPIRATORY IRRITATION, DIZZINESS, WEAKNESS,
NAUSEA, HEADACHE. INGESTION:NAUSEA, VOM ITING, DIARRHEA. ASPIRATION
OF MATERIALINTO LUNGS CAN CAUSE CHEMICAL PNEUMONITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR IMMED. IF BRTHG HAS STOPPED, GIVE
ARTF RESP. KEEP WARM & QUIET. GET MED ATTN IMMED. EYE:FLUSH W/LG
AMTS OF WATER, LIFTING UPPER & LOWER LIDS FOR @ LST 15 MINS.
SKIN:THOROUGHL Y WASH EXPOSED AREA W/SOAP & WATER. REMOVE CONTAMD
CLTHG. LAUNDER CONTAMD CLTHG BEFORE RE-USE. INGEST:DO NOT INDUCE
VOMIT, KEEP PERSON WARM, QUIET, & GET MED ATTN. ASPIR OF MATL INTO
LUNG (ING 6)

Flash Point Method:TCC
Flash Point:40.0F,4.4C
Lower Limits:0.9%
Upper Limits:7.0%
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICALS FOR SMALL FIRES.
FOAM FOR LARGE FIRES.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . COOL CLOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUID - CLASS IB. CAUTION-CLSD
CNTNRS MAY BUILD EXPLO PRESS FROM HEAT. VAPS ARE HVR/AIR & MAY
TRAVEL ALONG GROUND/MAY BE MOVED BY VENT & (SUPDAT)

Spill Release Procedures:KEEP SPECTATORS AWAY. ELIM ALL IGNIT SOURCES
(FLAMES, HOT SURFS, & SOURCES OF ELECTRICAL, STATIC/FRICTIONAL
SPKS). DIKE & CONTAIN SPILL W/INERT MATL SUCH AS SAND/EARTH.
TRANSFER LIQS TO COVERED METAL CNTNRS FOR RECOVERY/DISP, OR REMOVE
WITH (ING 7 )
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH APPRVD SCBA WHERE CONCENTRATIONS MAY
BE ABOVE TLV LIMITS. BELOW TLV LIMITS, USE NIOSH APPRVD VAPOR
RESPIRATOR.
Ventilation:LOCAL EXHAUST MUST BE SUFFICIENT TO KEEP AIRBORNE VAPOR
CONCENTRATION BELOW THE TLV LIMIT.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . TO
PVNT RPTD/PRLNGD SKIN CONT, WEAR IMPERVIOUS CLOTHING & BOOTS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:IGNITED BY PILOT LIGHTS, OTHER FLAMES, SPKS HEATERS, SMKNG,
ELEC MOTORS, STATIC DISCHARGE/IGNIT SOURCES @ LOCATIONS DISTANT
FROM MATL HNDLG. POINT. NEVER USE WELDING/CUTTING TORCH ON/NEAR DR
UM (EVEN EMPTY) BECAUSE PROD (OR RESIDUE) CAN IGNITE EXPLOSIVELY.

Boiling Pt:B.P. Text:>240F,>116C
Vapor Pres:SEE INGS
Vapor Density:3.9-5.0
Spec Gravity:0.9927(WATER=1)
VOC Pounds/Gallon:587
VOC Grams/Liter:4.9
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE, <0.1%
Appearance and Odor:ALUMINUM COLOR, HYDROCARBON ODOR.
Percent Volatiles by Volume:76.8

Stability Indicator/Materials to Avoid:YES
AVOID CONT W/STRONG OXIDIZING AGENTS. AVOID WATER, MINERAL ACIDS, HARSH
ALKALIS, HALOGENATED CMPDS. THIS MATL (ING 4)
Stability Condition to Avoid:EXCESS HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:THERMAL DECOMP OR COMBUST MAY PRODUCE
CARBON MONOXIDE, CARBON DIOXIDE, FORMALDEHYDE, AMMONIA, AND/OR
OXIDES OF NITROGEN.

Waste Disposal Methods:DISPOSE OF IN ACORDANCE WITH FEDERAL, STATE AND
LOCAL LAWS. INCINERATE ONLY IN EPA PERMITTED FACILTIY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.